3Doodler PRO+ Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Accessories 3Doodler PRO+. 3Doodler PRO+ 16.

Stampa la pagina

SECTION 4: TOOLS

(PROVIDED IN BOX)

Before showing you how to troubleshoot issues with

your 3Doodler PRO+ pen, we want to introduce you to

the tools provided in your box:

Unblocking Tool

Can be inserted through the Feed Port or the Nozzle-end

of the pen (see instructions for proper removal of the

Nozzle in order to use the Unblocking Tool through the

Nozzle-end). When inserted through the Nozzle-end,

the Unblocking Tool will push short strands of Filament

out through the Feed Port. When inserted through the

Feed Port, it will help push filament forward through the

Nozzle during extrusion.

Nozzle Set

Includes a variety of nozzles, and

the case is used for tightening

and removing each Nozzle.

Do not remove or replace the

Nozzles when pen is cold.

Do not overtighten the Nozzles,

as you may break your pen.

Mini DoodlePad

The DoodlePad is a transparent

Doodling surface that can be

used alone, or as an overlay.

The grid lines on the DoodlePad

allow for more precise Doodling.

TheDoodlePad is compatible with

PLA, ABS, and Nylon filament,

and you can use WOOD filament

on the backside only, not on

the front. It is NOT compatible

with FLEXY, Bronze, Copper, or

3Doodler Start filaments.

SECTION 5: NOZZLE SET

MANUAL

IMPORTANT NOTES

Read all instructions and warnings

prior to using this product. Improper

use may result in product damage,

excess heat, toxic fumes, fire or

explosion, damages for which you, and

not the manufacturer are responsible.

• Always ensure the 3Doodler PRO+ pen

is set to the proper target temperature

before removing or replacing the

nozzle. Attempting to remove or replace

the nozzle when the 3Doodler PRO+ is

cool will irreparably damage the pen

and void the warranty.

• Do not use excessive force when

removing or screwing on a nozzle.

Excessive force will damage your

3Doodler PRO+ pen.

• While it is normal for there to be

filament inside the nozzle itself, ensure

that the exterior of the nozzle is clean

when removing or replacing it. This

will prevent the nozzle from becoming

stuck inside the removal tool.

• Clean the nozzle while it is hot using a

thick cloth or a folded up tissue, taking

caution to protect your fingers from

touching the hot nozzle. Note that

touching the nozzle can cause burns if

touched directly!

SWAPPING NOZZLES

Step 1: Plug in your 3Doodler PRO+

switch to ON. Select the ABS setting, then select any speed,

and wait for the light to turn Blue .

Step 2: Remove the nozzle

counter-clockwise

extremely hot!

Step 3: Insert the new nozzle into the nozzle tool with

the screw/base facing outwards. It is okay for there to be

residual filament inside the nozzle.

Step 4: If the pen has gone to sleep, press the feed button

so that the pen heats up again. Once the pen is hot again

and reaches the target temperature, screw the nozzle onto

the pen by turning the nozzle tool clockwise

the nozzle is screwed on firmly, but don't force it!

Step 5: You're ready to start Doodling!

Step 6: When you're done, don't forget to store your

nozzles

USING THE SMOOTHING TOOL

Step 1: While the 3Doodler PRO+ is unplugged and

cool, slide the Smoothing Tool

3Doodler PRO+ .

Step 2: Turn on the 3Doodler PRO+, selecting the

temperature setting appropriate to the filament that you

are extruding.

Step 3: Use the Smoothing Tool to:

• Smooth out rough spots or edges

• Remove excess filament from your Doodles

• Create contours or textures

Step 4: Turn off the 3Doodler PRO+ and allow it to cool

(for approximately five minutes) before removing the

Smoothing Tool.

, and set the power

by turning the nozzle tool

. Do not touch the nozzle, as it is

. Make sure

onto the nozzle of the