3Doodler PRO+ Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Accessories 3Doodler PRO+. 3Doodler PRO+ 16.

Stampa la pagina

If you're using Custom Mode, you may need to modify the

settings heavily in order to reach your desired result. The

recommended temperature windows for the different

PRO+ filaments can be found on page 4.

DO NOT deviate from these recommended

temperature ranges in custom mode.

Step 8: Turning Your Pen Off

Remove all Filament from the pen using the Reverse feature. Don't

forget to snip those ends!

Move the ON/OFF Switch to OFF .

Step 9: How to Use the Maintenance Cover

The 3Doodler Pro+ has a removable maintenance cover on

the underside of the pen. When removed, this will give you

access to the drive mechanism. The maintenance cover is

magnetic and can be popped off with a fingernail. If you

have a feeding issue or are removing a short strand, simply

remove the cover, reverse the filament out, and then place

the cover back on. Since it's magnetic the cover will snap

back in place.

Allow your 3Doodler PRO+ to cool

completely before storing.

SECTION 3: TIPS AND BEST

PRACTICES

Pay Attention to Filament Types & Settings

• For optimal Doodling, we suggest only using the correct

temperature settings for the 3Doodler PRO+ Filaments .

• Double check which type of Filament you are using before

you turn on the 3Doodler PRO+ and insert a strand .

Always Snip Your Filament Strand Ends

After removing any Strand from the 3Doodler PRO+,

cut and remove the partially melted Filament at the end

of your Strand before

reinserting it. This will

reduce blockages and

clogging issues.

Reverse and

Remove Filament

Correctly

Do not pull any Strand from the back of the 3Doodler

PRO+ other than as directed. See page 8 for full

instructions.

Take a Break

Give your 3Doodler PRO+ a 30 minute rest after every 2

hours of continuous Doodling.

Sleep Mode

After 15 minutes of inactivity, the 3Doodler PRO+ pen's

heating system will automatically power down. You will

need to press the Feed Button or turn the Power Switch

off and then on again to continue use.

Treat Your Nozzle Right

In order to prevent breaking your 3Doodler PRO+

pen, ONLY remove and replace the nozzle when the

pen is turned on and fully heated up. When replacing

the Nozzle, take care not to overtighten.

Unsnipped Ends

Snipped Ends