3Doodler Flow Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Stampanti 3D 3Doodler Flow. 3Doodler Flow 9.

Stampa la pagina

SECTION 2: GETTING STARTED

We created this User

Manual as a step-by-

step guide to get you

comfortable with your

3Doodler Flow and its

features. Once you are

familiar with these steps,

you will be able to Doodle

with confidence.

STEP 1:

Turn on your

3Doodler Flow

and wait for it

to heat up

11/2023

Speed/ Drive

Controls

SPEED/ DRIVE BUTTON

SPEED/ DRIVE

BUTTON LEGEND

LEGEND: :

• Click once to start

• Click once to stop

• Double click to reverse

• Press and hold to drive "manually"

and then when you release the

pen stops.

LED Light

Communicates when the pen is

ready, the direction the filament is

traveling, and temperature state.

LIGHT LEGEND:

SOLID RED:

Pen is heating up

GREEN:

Ready to Doodle with PLA

BLUE:

Ready to Doodle with ABS

FLASHING GREEN/BLUE:

Flashing towards the tip of the pen

indicates the filament is moving forward.

Flashing towards the back of the pen

indicates the filament is in reverse.

How it Works:

The 3Doodler Flow melts plastic filament and uses a motor and gears to push it through the

pen's nozzle in a thin line. This process is called extruding or extrusion, and we will refer to it

throughout this user manual. Once extruded, the filament cools and hardens quickly, allowing

you to draw on surfaces and in the air. This user manual will show you how!

Plug the power cord into

the power adapter. Plug the

power adapter into the wall.

SECTION 2: GETTING STARTED

Nozzle

Hot tip where

filament is extruded

Power

Cord

Use either +/- to select the

desired filament. The back LED

light will glow red while the

front LED light will flash BLUE/

GREEN based on the selected

filament.

Click either FAST/SLOW to

lock in your selection. Note: your

pen comes with PLA spools.

Maintenance Cover

Allows you to look

inside your pen to see

filament

LCD Screen

For selecting PLA

or ABS and setting

extrusion temperatures

Plastic Loading Port

Insert your filament

spool here

60-90

Light to GREEN

secs

Both LED lights will glow RED

while the pen is reaching the

desired temperature. Once the

light has turned GREEN/BLUE,

your pen is ready to extrude.