Baltech VP-3410 Manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Manuale operativo per Strumenti di misura Baltech VP-3410. Baltech VP-3410 16. Vibration meter
Anche per Baltech VP-3410: Manuale operativo (12 pagine)

Stampa la pagina

ATTENTION

Before sensor installation it is necessary to remove chip

shield.

ATTENTION

Before operation please make sure that the sensor firmly

connected to magnet clamp.

4.2.3. Power supply connection

Just press the measurement button to switch on the fixture.

(Pic. 4-2)

Рiс. 4-2. Switching on the power supply

NOTE

The vibration meter switches off automatically in a minute

without pressing the button of measurement.

4.3. Application of vibration meter

Before making measurements make sure that the battery is not

discharged. If it is necessary, change the battery according to

division 5.1.

4.3.1. Measurement mode

Press the button «A•V•S» for the choice of measurement mode

(Pic. 3-2): acceleration, velocity or displacement. Selected

measurement mode is indicated by arrow in the right part of the

screen. (Pic. 4-3).