Camille Bauer SINEAX V604s Manuale di istruzioni per l'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Trasmettitore Camille Bauer SINEAX V604s. Camille Bauer SINEAX V604s 19. Universal signal converter
Anche per Camille Bauer SINEAX V604s: Istruzioni di sicurezza (13 pagine)
Stampa la paginaThe existing COM ports are determined as the communi-
cation interface when starting the program and selecting
RS232/RS485. Only COM ports found are available for
selection.
Limiting the range of possible device addresses speeds
up the search of connected devices considerably.
Example: If only 2 devices are connected, it makes sense
to select the address range from 1 to 2.
All settings are stored as the program is terminated. If the
COM port is not available upon the next start of the pro-
gram (e.g. because the converter has not been plugged in)
another valid interface is set.
To determine which COM port has been allocated to
the RS485 converter (if required), please proceed as
follows:
3. Block diagram
3.7 kV
Inputs
A
Camille Bauer
Power supply
D
Operating instructions V604s Be
The COM port of an external RS232 or RS485 converter
may be determined (and, if required, changed) via the
Windows system control.
Example for Windows XP: System control => System
This example shows the COM ports of a PCMCIA card
and a USB-RS232 converter:
- Silicom Serial Card: COM1
- USB-RS232 adapter: COM4
If you use the Camille Bauer USB-RS485 converter
(Article Number 163189), the same is to be connected as
follows:
T2
T1
A1
GND
B1
3.7 kV
D
A
μP
USB
2.3 kV
Contact
A1+
Analog-
A–
outputs
A2+
0.5 kV
+
Tx
–
Bus
Rx
GND
3