EDI EDV225MPC-3L-N1-VT Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Monitor EDI EDV225MPC-3L-N1-VT. EDI EDV225MPC-3L-N1-VT 3.

"EFFICIENCY" (bottom line). The top line is preset and reset through the supplied IR

remote. The "ACTUAL" line can be configured using a supplied photo-eye and reflective

To configure the display using the IR remote follow these instructions. The

"SET" button will be used to edit both lines. Keep pressing "SET" to rotate

through the edit mode.

Enter the EDIT mode

1. To edit the top line, point the IR remote toward the center of the display. Press

the "SET" button until the LED dot in the lower right corner of the least

significant digit flashes.

2. Enter the number you want displayed. Press "SET".

The "ACTUAL" line will increment by "1" every time the photo-eye is activated. A number

can be preset into the "ACTUAL" line using the IR remote.

Enter the EDIT mode

1. To edit the bottom line, point the IR remote toward the center of the display.

Press the "SET" button until the LED dot in the lower right corner of the least

significant digit flashes.

2. Enter the desired preset numbers

3. Press the "SET" button to save

plate or an optional momentary contact closure.

Preset GOAL Line

Preset ACTUAL Line