EDI EDV225MPC-3L-N1-VT Manuale rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale rapido per Monitor EDI EDV225MPC-3L-N1-VT. EDI EDV225MPC-3L-N1-VT 3.

current time increment duration. It is set at the factory as a non-

incrementing number.

desired time duration (in Seconds) and press "SET" to complete.

3. Press the "SET" button once again. The GOAL line decimal point will flash to

show the display is now running.

4. Input desired Increment value through the remote.

5. Press the "SET" button to save

Notes

A photo-eye and reflective plate are provided with the sign. The reflective plate needs to

•

be installed in the direction the photo-eye is being pointed at. The photo-eye operates by

sending an infrared beam in the direction that it is being pointed. The plate will reflect the

IR beam back to the photo-eye thus incrementing the bottom line of the display. Each time

the beam is broken, the bottom line will increment by one.

________________________________________________________________________

Bottom Line (DIFFERENCE or EFFICIENCY)

The bottom line will be internally calculated.

Change Increment value (Top Line)

Press the "SET" button until the top line shows "00.00" . Display will show

Press the "SET" button until the current value is removed. Input the

Please visit our website for more information:

www.electronicdisplays.com

Or Call: 1-800-367-6056

Or Our Support Website:

http://edisupport.helpserve.com/