AIMS Power GEN6600W240VS Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Inverter AIMS Power GEN6600W240VS. AIMS Power GEN6600W240VS 20. Portable inverter generator

 Be sure the outlet load current is within outlet's rated current.

 The economy control switch must be turned to "OFF" when using electric

devices that require a large starting current, such as a compressor or a

submersible pump. FIG.20

OVERLOAD INDICATOR LIGHT

The overload indicator light comes on when overloaded, short circuit, or voltage

is out of operating tolerance, or the AV output voltage rises. The electronic

breaker will then activate, stopping power to the generator in order to protect

the generator and any connected electric devices. The overload indicator light

(red) will flicker and then keep on, the generator will stop power output. If so

please follow the following steps: FIG.21

(a)

Reduce the total wattage of connected electric devices within the

application range.

(b)

Check for blockages in the cooling air inlet and around the control unit. If

any blockages are found, remove.

(c)

Press the "RESET" button to reset the output, FIG.22

CAUTION:

 The generator AC output automatically resets when the engine is stopped and then restarted.

 The overload indicator light may come on for a few seconds at first when using electric devices that require a large

starting current, such as a compressor or a submergible pump. This is not a malfunction.

2. DC APPLICATION

12V battery charging only. FIG.23

(a) 12V DC socket maybe use to charge cell phones and other small

electronics using a 12DC adapter

(b) When charging batteries, make sure to properly connect the leads to the

battery. Do not reverse the polarity.

FIG.20

FIG.21

FIG.22

MODE

RESET

FIG.23