ARTFOX Lighting Sky Beam 14RX Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione ARTFOX Lighting Sky Beam 14RX. ARTFOX Lighting Sky Beam 14RX 16. 295w lamp,15 prisms effects, rainbow
Stampa la pagina
menu(page) quickly.
2.3.1 ADDR--> Address: Set DMX Address
Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the
address code shouldn't is not greater than (512- channels quantity), otherwise the light will not been
controlled. Following is the operation:
Enter the page of DMX address, as shown in Figure 7, click the blank area in right side of display will
pop-up dialog as in Fig.4, modify value, then click 'ENTER' to confirm and save DMX address code.
2.3.2 MODE--> WorkMode: Set Light work mode
Enter the page of 'WorkMode' as shown in Figure 8 and modify setting. Can set light work mode, control
lamp and DMX channel mode.
DMX Ctrl:
Choose to set DMX Mode,
◆
Auto Run:
Choose to set Auto Mode,
◆
Sound Ctrl:
Choose to set Sound Mode,
◆
M/S Choose:Available just in 'AUTO RUN' or 'SOUND Ctrl' mode.
◆
ON--> Master. (Data will be sent to other slave lamp immediately.)
OFF--> Slaver. (NOT send data to other lamp via DMX Cable).(Default)
Light Switch:
◆
ON--> Turn on the light,
OFF--> Turn off the light.
Channel Qty: Light support 2 DMX Channel mode: sample or extend。
◆
Simple --> 18CH.(Default)
Figure 7 page of DMX Address
Figure 8 page of work mode
9