- ページ 9

照明器具 ARTFOX Lighting Sky Beam 14RXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARTFOX Lighting Sky Beam 14RX 16 ページ。 295w lamp,15 prisms effects, rainbow

menu(page) quickly.

2.3.1 ADDR--> Address: Set DMX Address

Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the

address code shouldn't is not greater than (512- channels quantity), otherwise the light will not been

controlled. Following is the operation:

Enter the page of DMX address, as shown in Figure 7, click the blank area in right side of display will

pop-up dialog as in Fig.4, modify value, then click 'ENTER' to confirm and save DMX address code.

2.3.2 MODE--> WorkMode: Set Light work mode

Enter the page of 'WorkMode' as shown in Figure 8 and modify setting. Can set light work mode, control

lamp and DMX channel mode.

DMX Ctrl:

Choose to set DMX Mode,

◆

Auto Run:

Choose to set Auto Mode,

◆

Sound Ctrl:

Choose to set Sound Mode,

◆

M/S Choose:Available just in 'AUTO RUN' or 'SOUND Ctrl' mode.

◆

ON--> Master. (Data will be sent to other slave lamp immediately.)

OFF--> Slaver. (NOT send data to other lamp via DMX Cable).(Default)

Light Switch:

◆

ON--> Turn on the light,

OFF--> Turn off the light.

Channel Qty: Light support 2 DMX Channel mode: sample or extend。

◆

Simple --> 18CH.(Default)

Figure 7 page of DMX Address

Figure 8 page of work mode