AIMS Power PWRIC150012W Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Inverter AIMS Power PWRIC150012W. AIMS Power PWRIC150012W 10. Dc to ac power inverter

SAVE THIS MANUAL

You will need the manual for the safety warnings and precautions, assembly instructions, operating and

maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice

number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future

reference.

Basic Operation

•

Make sure that you choose the right operating voltage for both input and output of the inverter.

•

When unpacking, make sure that the inverter is in good condition. If any parts are missing or

broken, please call AIMS Power, Inc. at the number found on the warranty card.

•

Place the power inverter on a flat surface. Make sure it has adequate ventilation and is not in

direct sunlight. Fasten the inverter securely to the surface, using screws or some other

means. If holes are to be drilled, follow safe, proper installation techniques.

•

Before you connect the battery cables, make sure the power switch is in the off position.

Connect Red (+) battery cable to Red (+) inverter terminal. Connect Black (-) battery cable to

Black (-) inverter terminal. Connect Red (+) battery cable to Red (+) battery terminal. Connect

Black (-) battery cable to Black (-) battery terminal. Alligator clamp cables may be used but only

to connect to the battery. Do not use clamps on inverter terminals. Alligator clamps are not a

permanent solution. You may see a spark during connection.

•

Connect the ground cable to an earth ground, such as a metal water pipe or to the vehicle

ground when used in a vehicle if the inverter includes a ground port.

•

Turn the power switch to the on position, which is located on the front of the inverter. The

green LED light will confirm that AC power is present.

•

Before plugging the equipment into the inverter, make sure the equipment AND the inverter

are off. Turn inverter on first, then turn on the equipment.

•

The power inverter can be used either while the engine is running or off.

•

Charging: The AC input port on the back of the inverter will throughput AC and charge the

battery (s) when AC power is available. This is done automatically. The included AC cable

must be plugged into a wall outlet or 120V outlet on a generator. If the inverter doesn't

receive AC power it will automatically switch to inverter mode. To charge the battery, AC

power must be supplied to the inverter and the charger switch must be in the reset position.

The switch will be illuminated when charging. To turn charger off put switch into off

position and supplied AC power will only be bypassed and no DC charge. Inverter does not

clean up or line filter the supplied AC input voltage. The AC output will be the same as the