dji Ronin Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Camera Accessories dji Ronin. dji Ronin 8. Raveneye image transmission system

6. Power Button

Press and hold to power on or off. Press six times

to reset the default Wi-Fi password to 12345678

(the battery level indicators will blink three times

when the password is successfully reset. A new

password must be set in the Ronin app). Press

and hold for 10 seconds to force shutdown.

Installation and Connection

There are three ways to use RavenEye.

Method 1: use RavenEye with DJI RS 2 or RSC 2 (DJI RS 2 is used as an example below)

1. Attach the image transmitter to the gimbal via the cold shoe. Adjust the antennas as shown and keep them

away from motor.

2. Connect the HDMI

cable according to the camera model.

3. Connect the power/communication port of the image transmitter to the image transmission port of the gimbal

using the provided USB-C to USB-C cable.

If the cold shoe of the gimbal is not available, you can attach the cold shoe to 1/4" screw adapter with

the image transmitter and use with a device that has a 1/4" screw hole.

4. Connect the shutter control port of the camera to the RSS camera control port of the gimbal.

port of the image transmitter to the HDMI port of the camera using the provided HDMI

7. Cold Shoe

For connecting to the gimbal or camera.

8. Power/Communication Port (USB-C)

For charging and communicating with DJI RS 2

and RSC 2.

9. Reserved LED

Reserved LED currently without a function.

HDMI