dji Ronin User Manual - Page 3
Browse online or download pdf User Manual for Camera Accessories dji Ronin. dji Ronin 8 pages. Raveneye image transmission system
Print Page
6. Power Button
Press and hold to power on or off. Press six times
to reset the default Wi-Fi password to 12345678
(the battery level indicators will blink three times
when the password is successfully reset. A new
password must be set in the Ronin app). Press
and hold for 10 seconds to force shutdown.
Installation and Connection
There are three ways to use RavenEye.
Method 1: use RavenEye with DJI RS 2 or RSC 2 (DJI RS 2 is used as an example below)
1. Attach the image transmitter to the gimbal via the cold shoe. Adjust the antennas as shown and keep them
away from motor.
2. Connect the HDMI
TM
cable according to the camera model.
3. Connect the power/communication port of the image transmitter to the image transmission port of the gimbal
using the provided USB-C to USB-C cable.
If the cold shoe of the gimbal is not available, you can attach the cold shoe to 1/4" screw adapter with
the image transmitter and use with a device that has a 1/4" screw hole.
4. Connect the shutter control port of the camera to the RSS camera control port of the gimbal.
4
port of the image transmitter to the HDMI port of the camera using the provided HDMI
7. Cold Shoe
For connecting to the gimbal or camera.
8. Power/Communication Port (USB-C)
For charging and communicating with DJI RS 2
and RSC 2.
9. Reserved LED
Reserved LED currently without a function.
HDMI