djm direct DJMSS406 Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Sega djm direct DJMSS406. djm direct DJMSS406 19. Scroll saw

Stampa la pagina

10. Operation

Mounting the machine on a work bench

A workbench made from solid wood is better than

one made of plywood, as interfering vibrations

and noise are more noticeable with plywood.

The necessary tools and small parts for assembling

the saw on a workbench are not supplied with

the saw. However, use equipment of at least the

following:

1. Machine

2. Bolt M8 (×3)

3. Flat Washer Ø8 (×3)

4. Rubber Pad

5. Work Table

6. Big Flat Washer Ø8 (×3)

7. Lock Washer Ø8 (×3)

8. Nut M8 (×3)

First of all, drill holes into the seating surface

and then Insert the screws.

A foam rubber base for reduction of noise is

not supplied with the saw either. However, we

expressly recommend that you use such a base to

keep vibration and noise to a minimum. Ideal size

400 × 240 mm.

11. Setting the Saw Bench

• Release the star button and bring the saw

bench to a right angle in relation to the saw blade.

Use a 90° angle L-square measure the right angle

between the blade and the bench. The saw blade

be at 90° to the angle.

• Close the star button when the distance

between the blade and the 90° angle is at a

minimum. The bench should then be at 90° to the

saw blade.

Setting the angle scale

• Release the lock screw and bring the indicator

to the zero position. Fasten the screw.

Please note: the angle scale is a useful piece of

supplementary equipment, but should not be

used for precision work. Use scrap wood for saw

tests, adjust the bench if necessary.

Horizontal Saw Bench and Diagonal Cuts

The saw bench can be positioned into a 45°

diagonal position or be left in the horizontal

position.

You can read off the approximate slope angle

by using the angle scale located under the work

bench. For more exact adjustment, use scrap

wood for some saw tests; adjust the bench if

necessary.