Artillian 1UTVRK Manuale d'installazione e d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Cremagliere e cavalletti Artillian 1UTVRK. Artillian 1UTVRK 8. Utv bed mounted tool rack
!
WARNING
!
It is the user's responsibility to ensure that installation of this product
does not affect the functionality of the vehicle ROPS, tires, or any other
safety feature of the vehicle. Failure to do so may result in injury or
death. Due to the many variations between UTV models, the UTV
Mounted Tool Bar or Tool Rack or some of its quick removal accessories
may interfere with dump bed operation, fender flares, or tires. If
necessary, the quick-release Cam Lever Latches on the ROPS Mounted
Tool Bar accessories allow a given accessory to be quickly removed and
relocated to a non-interfering location.
Artillian strives to continuously improve our products. As such, the actual
product may vary from the images shown throughout this manual.
INSTALLATION
Park the vehicle on a flat, level surface.
1. See fig. 1. Install (4) Tool Bar mounting brackets using the
installation instructions included with the 1UTVTB kit.
a. Note: It will help to utilize the included tool bar (ref.: 42" long
tube) to determine the optimal locations for the mounting
brackets on your vehicle bed, but do not fasten the tube to
the mounting brackets at this time.
2. See fig. 2. With an assistant, install a UTV Tool Rack Vertical Tube
(ref.: 32" long tube) onto the inboard side of the mounting bracket,
as shown. Ensure that the two threaded inserts on the opposite
side of the tube are at the top.
a. Using the tube clamp and hardware provided in the 1UTVTB
kit, fasten the vertical tube and the horizontal tool bar to the
mounting bracket
Hardware: 5/16-18 X 1" LG. Flange Head Cap Screws (FHCS)
3. See fig. 3. Repeat step 2 for the second vertical tube.
4. See fig. 4. Repeat steps 2 - 3 for the other side of the UTV bed.
5. See fig. 5. Install the cross bar mounting brackets to the top
inboard side of each vertical tube in the orientations shown.
a. Image 5a is a close-up view of the corner "a" mounting
bracket installed on the inboard side of the vertical tube.
(Rotated for clarity)
Hardware: 5/16-18 X ¾" LG. FHCS
Corner "a"
Fig. 5
KIT INSTALLATION
Fig. 5a
UTV Bed
Tool Bar
Mounting
Bracket
Fig. 1
Tool Bar
Fig. 2
Fig. 3
Fig. 4
3 of 8
Vertical
Tube