akkuteam VAS 5581 Manuale di istruzioni per l'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Strumenti di misura akkuteam VAS 5581. akkuteam VAS 5581 17. Hv measurement adapter
Stampa la pagina
Operating Instructions
HV Measurement Adapter VAS 5581
Close the unit back up with all previously removed screws and check
the proper seat of the unit bottom.
Insert the charger plug of the power supply into the charging plug on
the measurement adapter and plug the power supply into a matching
power outlet. Country-specific power cables can be used as an alterna-
tive on the power supply, provided these are equipped with a Type C6
power plug.
www.akkuteam.de
20
When the power supply is connected to the measurement adapter, the charging
manager of the internal battery is in charge operation mode.
This is indicated by a flashing of the green status LED with the battery symbol
"full battery" and happens regardless of whether or not a battery is installed.
Start the measurement adapter with the green On button The green LED next to the
On switch confirms when the unit is operational. The battery
status indicator indicates the charging status of the installed battery.
When no battery is installed in the measurement adapter, all 3 battery LEDs light
up for 15 seconds and then go dark after the measurement adapter was started.
NOTE! When no battery is installed in the battery compartment, the
measurement adapter can only be operated with a connected power
supply. The operational reliability is increased by installing a device-
specific battery.
NOTE! Only use device-specific batteries (VAS 5581/10)!
(Part No. A 000606, ASE-No. 109 051 00 000).
21
V 1.0