- ページ 11

計測機器 akkuteam VAS 5581のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。akkuteam VAS 5581 17 ページ。 Hv measurement adapter

Operating Instructions

HV Measurement Adapter VAS 5581

Close the unit back up with all previously removed screws and check

the proper seat of the unit bottom.

Insert the charger plug of the power supply into the charging plug on

the measurement adapter and plug the power supply into a matching

power outlet. Country-specific power cables can be used as an alterna-

tive on the power supply, provided these are equipped with a Type C6

power plug.

www.akkuteam.de

When the power supply is connected to the measurement adapter, the charging

manager of the internal battery is in charge operation mode.

This is indicated by a flashing of the green status LED with the battery symbol

"full battery" and happens regardless of whether or not a battery is installed.

Start the measurement adapter with the green On button The green LED next to the

On switch confirms when the unit is operational. The battery

status indicator indicates the charging status of the installed battery.

When no battery is installed in the measurement adapter, all 3 battery LEDs light

up for 15 seconds and then go dark after the measurement adapter was started.

NOTE! When no battery is installed in the battery compartment, the

measurement adapter can only be operated with a connected power

supply. The operational reliability is increased by installing a device-

specific battery.

NOTE! Only use device-specific batteries (VAS 5581/10)!

(Part No. A 000606, ASE-No. 109 051 00 000).

V 1.0