Custom Crimp CC150MOB Series Manuale dell'operatore - Pagina 10

Sfoglia online o scarica il pdf Manuale dell'operatore per Utensile a crimpare Custom Crimp CC150MOB Series. Custom Crimp CC150MOB Series 15. Hose crimper with dial micrometer and 240 tons of crimping force has the capability to crimp up to 2" industrial hose

Custom Crimp CC150MOB Series Manuale dell'operatore
CC150MOB
The Manual Back Stop eliminates guesswork allowing the
operator to visually observe exactly where the crimp will be
positioned on the fitting without the need for trial and error and
product scrap due to poor crimp positioning.
With the Coupling Stop retracted, load the appropriate set of
dies and set crimp diameters as required.
With the dial micrometer at 0, bring the dies to a fully closed
position.
Loosen the Coupling Stop Clamp
and position the Coupling Stop
against the back face of the dies.
Position the fitting against the Cou-
pling Stop and actuate the crimper
in the normal manner.
General Production Hose Crimper

MANUAL BACK STOP SETUP

Slide the Coupling Stop Guide
against the Coupling Stop Arm.
The dimension from the face of the
fitting to the crimp position will now
be the dimension established in the
previous step.
Coupling Stop
Coupling Stop
Clamp
Coupling
Stop Guide
Hold the fitting against the Coupling
Stop Arm withdraw the Coupling Stop
Rod such that the Guide is aligned
with the desired crimp position. Lock
the Coupling Stop Clamp.
10