Custom Crimp CC150MOB Series Operator's Manual - Page 10

Browse online or download pdf Operator's Manual for Crimp tool Custom Crimp CC150MOB Series. Custom Crimp CC150MOB Series 15 pages. Hose crimper with dial micrometer and 240 tons of crimping force has the capability to crimp up to 2" industrial hose

Print Page

CC150MOB

The Manual Back Stop eliminates guesswork allowing the

operator to visually observe exactly where the crimp will be

positioned on the fitting without the need for trial and error and

product scrap due to poor crimp positioning.

With the Coupling Stop retracted, load the appropriate set of

dies and set crimp diameters as required.

With the dial micrometer at 0, bring the dies to a fully closed

position.

Loosen the Coupling Stop Clamp

and position the Coupling Stop

against the back face of the dies.

Position the fitting against the Cou-

pling Stop and actuate the crimper

in the normal manner.

General Production Hose Crimper

MANUAL BACK STOP SETUP

Slide the Coupling Stop Guide

against the Coupling Stop Arm.

The dimension from the face of the

fitting to the crimp position will now

be the dimension established in the

previous step.

Coupling Stop

Clamp

Coupling

Stop Guide

Hold the fitting against the Coupling

Stop Arm withdraw the Coupling Stop

Rod such that the Guide is aligned

with the desired crimp position. Lock

the Coupling Stop Clamp.