Artison LRS Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Artison LRS. Artison LRS 10. Surround satellites (left, ight, surround)

Diagram 3
Port
,-----/
I
Port
9.
Place the bracket against the wall at the desired mounting location.
a. Line the bracket mounting holes up on a stud where possible. If you can not attach to
a stud follow the instructions for using dry wall anchors.
b. Use a level to make sure that the speaker is level once it is mounted. In the case of the
LRS-IW use a level to assure that the template is properly aligned before marking the
cut out hole
10. Using a pencil, mark the mounting locations on the wall by drawing through the mounting
holes in the bracket. For the In Wall LRS-IW use the supplied template to determine the
proper location and size of the cut out. Use a pencil to mark the cut out. Cut the hole for
the LRS-IW after making sure that the speaker is in the desired location and will fit into
the space without interfering with studs or other obstacles.
11. Set the bracket aside.
12. If you were not able to mount the LRS to a stud, use dry wall inserts. Using drywall
anchors create secure mounting locations for the speaker bracket. This hould be don
with any screw locations that DO NOT hit a wall stud.
Use anchors that will hold at least two times the weight of the speaker.
13. Now mount the wall bracket.
a. Pu II the speaker wire through the rectangular opening on the bracket.
b. The rectangular opening in which the wires are pulled through should be at the bottom
of the bracket.
c. Mount the bracket to the wall using drywall screws and
lor
the crews for anchors that
you installed earlier. (DO NOT OVER TIGHTEN THE SCREWS AS THIS WILL WARP THE
BRACKET AND MAKE THE LRS INSTALLATIO
DIFFICULT)
d. Use at least 1
1/
4 "
course thread drywall screws anywhere that you are mounting to a
stud, this will insure that the bracket is held securely.
4