DK-TEC HNDK Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Macchine agricole DK-TEC HNDK. DK-TEC HNDK 15. Woodchipper for tractor

In the following section, we have listed many of the problems, causes and solutions that you may

encounter in using the chipper. If you encounter a problem that is difficult to solve even after

reading through this section, you can call DK-TEC.

Problem

The flywheel does not

Slow feeding

The chipper requires a large

amount of force otherwise it

will stall

Requires large amount of

power

Vibration during operation

8. Problem solving

Cause

Blocked eject

turn

The flywheel has stopped

Broken safety pin

The knives are dull

The ejection spout is clogged

Blocked eject

The flywheel has stopped

Green material comes out of

the ejection spout

Dull knives

The flywheel has stopped

Dull knives

PTO vibration

Solution

Turn off the chipper and clean

the one for dirt

Clean the flywheel

Replace safety pin

Turn or replace the blades

Clean the eject spout

Clean the flywheel

Put only dry material into the

ejection spout

Turn or replace the blades

Clean the flywheel

Turn or replace the blades

Check out the PTO's phase-in.

Check the flywheel and look for

errors

02/2020