CUTRA Wondercutter Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Cutter CUTRA Wondercutter. CUTRA Wondercutter 10.

p.1

01 Components

Main body

Remaining battery LED

Power button

Handle (Cutter)

Cable

Main body

Belt clip

Leg

* The battery-pack is built-in.

Handle (Cutter)

Power switch

Transducer horn (Vibrator)

Blade

Blade(40p)

Charger

* Check for the following components

03 Methods of use

01. Pull the handle out from the inside of the main body.

02. Press the main power button for 1 to 2 seconds to turn the LED setting into stand-by mode.

Please note, a second press of the power button will turn power off. In Stand-by Mode the green

LED on the handle is not on.

03. While in the Stand-by Mode, the Wondercutter operates by pressing and holding the button on

the cutter handle. While the button is held, the blade will rapidly move with ultra-sonic vibrations

of 40,000 per second. Releasing the handle button will stop the vibrations. The green LED on the