CUTRA Wondercutter 사용 설명서 - 페이지 2

{카테고리_이름} CUTRA Wondercutter에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CUTRA Wondercutter 10 페이지.

p.1

01 Components

Main body

Remaining battery LED

Power button

Handle (Cutter)

Cable

Main body

Belt clip

Leg

* The battery-pack is built-in.

Handle (Cutter)

Power switch

Transducer horn (Vibrator)

Blade

Blade(40p)

Charger

* Check for the following components

03 Methods of use

01. Pull the handle out from the inside of the main body.

02. Press the main power button for 1 to 2 seconds to turn the LED setting into stand-by mode.

Please note, a second press of the power button will turn power off. In Stand-by Mode the green

LED on the handle is not on.

03. While in the Stand-by Mode, the Wondercutter operates by pressing and holding the button on

the cutter handle. While the button is held, the blade will rapidly move with ultra-sonic vibrations

of 40,000 per second. Releasing the handle button will stop the vibrations. The green LED on the