Alutech AR-1-500N Manuale operativo - Pagina 2

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore Alutech AR-1-500N. Alutech AR-1-500N 2.

Stampa la pagina

Operating

manual

RADIO RECEIVER

AR-1-500N

ENGLISH

DESCRIPTION

Designed for remote control of automatic doors. This radio receiver

is used with radio controls AT-4A and AT-4N. When a command from

the radio control is received, the receiver output closes for ~ 1 sec-

ond.

TECHNICAL SPECIFICATIONS

Number of control channels ...................................................................................... 1

Working supply voltage ....................................................... 12 V to 24 V DC / AC

Absorbed current (NMT)................................................................................... 18 mA

Working frequency ................................................................................... 433.92 MHz

Number of remote controls accepted .....................................up to 500 pcs

Relay output .....................................................................................................................NO

Output contact load .................................. 0.5 А max., 24 V DC / 0.25 A max.,

Enclosure protection degree .............................................................................. IP40

Ambient temperature ................................................................. − 20 ° С ... + 50 ° С

Overall dimensions (NMT) ..................................... 78 mm × 44 mm × 25 mm

Connection cable length (NLT) ................................................................450 mm

Weight (NMT)................................................................................................................75 g

The company reserves the right to introduce changes to

this manual and technical specifications of the product. The

content of this manual cannot be used as a grounds for legal

claims.

INSTALLATION

Installation of the receiver can be performed in two ways: by moun-

ting using the self-adhesive pad (included in the kit); or by means of

the enclosure fixation holes (fig. 1). Perform the receiver connection

in accordance with Figure 2.

AR-1-500N

LEARN

LED

BUTTON

Ø3,5 mm

Figure 1

The installation location should provide high-quality recep-

tion of the radio signal (no screening and reflecting surfaces

or other sources of radio emission). Before starting connec-

tion works, ensure that the supply has been isolated so that

the wiring is not live.

REMOTE CONTROL PROGRAMMING

125 V AC

RECORD

press 'LEARN BUTTON' of receiver

press and release the selected remote

control button

press the same button again

DELETING

Press and hold (~ 8 s) 'LEARN BUTTON'

of receiver

When recording a remote control that has previously been added

to memory earlier, the remote control will be overwritten, and if

the another button has been pressed while recording, then a new

remote control button will be added to memory. The deleting pro-

cedure leads to deleting of all added radio controls from the receiver

memory.

GND

Figure 2

'LED' Indication

illuminates

does not illuminate

flashes several times

'LED' Indication

flashes (~ 8 s)

STORAGE, TRANSPORTATION

AND DISPOSAL

Keep the packed product in dry premises at temperatures between

of 0 ... + 25 ° С and relative air humidity no more than 80 %. The air

inside the premises must not contain acidic, alkaline and other ag-

gressive substances. Do not expose the product to the precipitation

or direct sunlight. Storage period—3 years from the date of manu-

facture. Transportation may be carried out by means of any roofed

land vehicle fitted with the means to prevent crushing of packages

and load retention equipment.

Disposal is to be performed in accordance with the current

waste processing and disposal regulations applicable in

the country of the Customer. The product does not con-

tain precious metals and substances that pose a threat to

life, human health or the environment. Operation life—

5 years.

WARRANTY

The warranty on the operation capacity of the product is provided if

the storage, transportation and maintenance operations are carried

out according to the set regulations. The warranty period is three

years. Under the warranty, the service department only eliminates

malfunctions caused by the fault of the Manufacturer.

Note: the parts replaced under the warranty are considered the pro-

perty of the service department that carried out the product repair.

The warranty does not apply in the following cases:

•

violation of use and storage regulations;

•

alterations performed by unauthorised persons, damage of the

products caused by the consumer or third parties;

•

damage caused by water ingression within the device;

•

force majeure (fires, lightning strikes, floods, earthquakes and

other natural disasters);

•

failure to provide a completed operation manual.

For questions about the service please contact the organization

that carried out the installation of the equipment.

STATEMENT OF COMPLIANCE

Copies of declarations of compliance can be found at:

http://www.alutech-group.com/en/products/other/automatics/

documents

Made in China

Manufacturer: «Shanghai Baolu Technology Co., Ltd.», 8 / f,

Sianlu Industry Park, 3009 Gudai Road, Shanghai 201100, China,

phone: 0086 21 54888982, fax: 0086 21 54888926

Importer to the Republic of Belarus / Authorised representa-

tive: Alutech Systems s.r.o., 348 02, Czech Republic, Bor u Tachova,

CTPark Bor, Nova Hospoda 19, D5-EXIT 128,

phone / fax: + 420 374 6340 01,

e-mail: [email protected]

12.2018