aion MEGALITH Manuale - Pagina 7
Sfoglia online o scarica il pdf Manuale per Accessori per strumenti musicali aion MEGALITH. aion MEGALITH 10.
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout assumes the use of closed-frame jacks like the
open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
MEGALITH DUAL DRIVE
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
DRIVE
LEVEL
x: -0.65, y: +1.71
ø9/32"
HI GAIN
x: 0, y: +0.41, ø1/4"
BOOST
LEVEL
SUB
x: 0, y: +0.41
x: -0.65, y: +0.41
ø1/4"
ø9/32"
CENTER (0,0)
x: -0.765, y: -1.10
ø5mm
BOOST
x: -0.765, y: -1.675
ø15/32"
Switchcraft
111X. If you'd rather use
ø3/8"
IN
GAIN
x: 0.65, y: +1.71
ø9/32"
TONE
x: 0.65, y: +0.41
ø9/32"
x: +0.765, y: -1.10
ø5mm
DRIVE
x: -0.765, y: -1.675
ø15/32"
7