aion MEGALITH 매뉴얼 - 페이지 7

{카테고리_이름} aion MEGALITH에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion MEGALITH 10 페이지.

페이지 인쇄

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

Top jack layout assumes the use of closed-frame jacks like the

open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

MEGALITH DUAL DRIVE

5mm LED

bezel, available from several parts suppliers. Adjust

125B

0.625"

ø3/8"

ø1/2"

OUT

DRIVE

LEVEL

x: -0.65, y: +1.71

ø9/32"

HI GAIN

x: 0, y: +0.41, ø1/4"

BOOST

LEVEL

SUB

x: 0, y: +0.41

x: -0.65, y: +0.41

ø1/4"

ø9/32"

CENTER (0,0)

x: -0.765, y: -1.10

ø5mm

BOOST

x: -0.765, y: -1.675

ø15/32"

Switchcraft

111X. If you'd rather use

ø3/8"

GAIN

x: 0.65, y: +1.71

ø9/32"

TONE

x: 0.65, y: +0.41

ø9/32"

x: +0.765, y: -1.10

ø5mm

DRIVE

x: -0.765, y: -1.675

ø15/32"