3M S15I - Digital Projector SVGA LCD Manuale di sicurezza del prodotto - Pagina 12

Sfoglia online o scarica il pdf Manuale di sicurezza del prodotto per Proiettore 3M S15I - Digital Projector SVGA LCD. 3M S15I - Digital Projector SVGA LCD 15. Multimedia projector
Anche per 3M S15I - Digital Projector SVGA LCD: Opuscolo e specifiche (4 pagine), Specifiche tecniche (2 pagine), Manuale di avvio rapido (4 pagine)

Stampa la pagina

3M S15I - Digital Projector SVGA LCD Manuale di sicurezza del prodotto

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Please loosen the screw (marked by arrow) (1). Then, unhook the

claws of the lamp door (2), and remove the lamp door (3).

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (4)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (5)

4. Insert lamp module: Carefully insert (5) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (4) to secure the lamp module in place.

Optional Lamp: 78-6969-9812-5 (Contact 3M customer Service.)

Insert the hinge tabs on the bottom of the lamp access door (6), then

two claws (7)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw marked

by arrow

(2) Claws

(3) Lamp access door

Note

(4) Screws marked

by arrow

(5) Handles

3M™ Multimedia Projector S15i Product Safety Guide

push the center point of

(6) Tab

(7) Center point of

claws