DOEPFER A-155 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Apparecchiature di registrazione DOEPFER A-155. DOEPFER A-155 16.

Stampa la pagina

doepfer

4. In / Outputs

! Trigger Outputs

Sockets ! are the outputs from the three trigger rows

and the gate row.

" Control

Alongside the four buttons for sequencer control, there

are four corresponding digital control input sockets ".

• Start

A signal here starts the sequence.

• Stop

A signal here stops the sequence.

• Clock

A clock signal here steps through the

sequence. Also called 'step' input.

• Reset

A signal here sends the sequence back to

step one.

Start and Stop inputs work in trigger mode.

As soon as they sense the rising edge of a

pulse, they produce a momentary signal.

The length of the pulse makes no difference

- a pulse of long duration still just produces a

momentary trigger.

System A - 100

§ CV outputs, control inputs

The two groups of sockets § contain the analog CV

outputs for each row, and the digital control inputs

for the sample-and-hold and slew limiter sections.

The upper group of sockets relates to analog CV row

1, and the lower to analog CV row 2.

• Pre Out

• Post Out

Analog / Trigger Sequencer

Clock (step) and Reset inputs, on the other

hand, work by sensing level: so, for instance,

Reset will always be active (keeping the

sequence at step one) as long as the reset

signal is "high".

The control voltages set on the

respective analog CV row are output

here, before (pre) passing through the

slew limiter and sample-and-hold sec-

tions.

: The control voltages set on the

respective analog CV row are output

here, after (post) passing through the

slew limiter and sample-and-hold sec-

tions.

A-155