Doepke Dupline DSS 4R-EIB Manuale di istruzioni per l'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Accessories Doepke Dupline DSS 4R-EIB. Doepke Dupline DSS 4R-EIB 12. Operating signal sensors with acknowledgement feature

Stampa la pagina

Doepke

8.3. Connection of EIB Push-buttons to DSS 4R-EIB

The connection between the DSS 4R and a 2-way EIB operating switch is via the 10-

pole flexible circuit-board supplied complete with system plug connectors and the

mounting plate provided. To connect, insert the DSS 4R with connected Dupline line,

power supply and system cable into the flush-mounted socket, pass the system cable

through the mounting plate as illustrated below and connect the EIB switch. When the

mounting plate is screwed down the EIB switch can be snapped into the plate. The con-

nection diagram for the DSS 4R-EIB is shown in Chapter 11.2 on page 12.

Dupline bus /

Supply

voltage

9. Guarantee

All professionally installed, unaltered devices are covered by warranty during the statu-

tory guarantee period from the day of purchase by the end user. The guarantee is not

applicable to damage incurred during transport or caused by short-circuit or overload-

ing. In the event of defects in workmanship or material, which are discovered within the

guarantee period, the company will provide a replacement free of charge. The guaran-

tee will be rendered null and void if the sensing chamber is opened or the device is tam-

pered with.

10. Technical Data

Dupline

Current input

Input channels 4 operating signal inputs

Output channels 2 acknowledgement outputs

Inputs

Power supply not applicable

3931176/08/12/D - The right to make technical changes reserved!

Min.

Type Semiconductor inputs

Voltage

21.5 VDC

EIB mounting plate

EIB switch

System cable

Typ.

750 µA

24 VDC

26.5 VDC

Max.