Cliq AS-1001D Manuale di istruzioni per l'uso - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pompa dell'acqua Cliq AS-1001D. Cliq AS-1001D 12. Suction pump
Stampa la pagina
GUIDANCE AND MANUFACTURER'S DECLARATION
• All Medical Electrical Equipment requires special precautions regarding Electromagnetic Compatibility (EMC) and should only be installed and
put into service according to EMC information provided in the accompanying section.
• Portable and Mobile RF Communications Equipment could affect Medical Electrical Equipment.
• The Medical Electrical Equipment should not be stacked with, or close to other equipment. If this is necessary, ensure that the equipment is
observed as having normal operation in the configuration of its intended use.
• EMC testing performed by Electronics Testing Center of Taiwan (Web: http://www.etc.org.tw/; Phone: +886-2-26023052).
Report No.: ETC 13-02-RBO-026
WARNING: Use of this device with electrical accessories such as extension cords or plug adapters may result in non-compliance and may negatively
affect EMC performance.
Recommended separation distances between portable and mobile RF communications equipment and the
ME equipment
The AS-1001D suction pump is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer
or the user of the AS-1001D suction pump can help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the AS-1001D suction pump recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output
power of transmitter
(W)
0.01
0.1
1
10
100
Copyright © 2019 ANEST IWATA SPARMAX Co., Ltd. All rights reserved.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
3
5 ,
P
d=
V
1
0.12
0.37
1.17
3.7
11.67
10 / 12
(m)
80 MHz to 800 MHz
3
5 ,
P
d=
E
1
0.12
0.37
1.17
3.7
11.67
Cliq_AS-1001D Manual (230V50Hz_20190125.1)
800 MHz to 2.5 GHz
7
P
d=
E
1
0.23
0.74
2.33
7.37
23.33
3510406D