Dogtra 1400NCP Series Manuale d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Dogtra 1400NCP Series. Dogtra 1400NCP Series 17. Remote controlled dog training collars
Anche per Dogtra 1400NCP Series: Manuale delle impostazioni (6 pagine)
TESTING
TESTING YOUR
COLLAR
1. Turn the collar on by pressing the button
on the back side of the collar receiver.
The indicator light will come on for a
moment then blink once every two
seconds, showing that the collar is ready
to use. (If the indicator light is not green
but amber or red, the batteries need to be
charged.) Place the test light on the
contact points of receiver and hold it
there.
22
2. Watch the test light as you push the "Nick"
button on the transmitter. It should light for
just a moment.
3. Watch the test light as you push the
"Constant" button on the transmitter. It
should glow brightly. As a safety feature,
the collar receiver will automatically shut
off stimulation if the constant button is
depressed for twelve seconds or longer.
4. Change the intensity dial on the transmitter
clockwise and then counterclockwise. The
test light should glow brighter with higher
levels of stimulation and dimmer with
lower levels.
NOTE : It is normal for the test light not to
come on if the intensity level is set below
level ten.
5. Pressing the "Pager" button on the side of
the transmitter causes the collar to vibrate
for up to twelve seconds. The collar will
reactive when you push the button again.
TESTING
23