Dogtra RB 1000 Series Manuale di impostazione del codice - Pagina 2
Sfoglia online o scarica il pdf Manuale di impostazione del codice per Prodotto per la cura degli animali domestici Dogtra RB 1000 Series. Dogtra RB 1000 Series 2.
Stampa la pagina
1. Start with the receiver/collar turned off and the transmitter turned on.
On the front of the transmitter there is a GR/OR toggle switch. Set this toggle switch on the
"GR" position to synchronize the transmitter with the GREEN collar/receiver. Set the toggle
switch on the "OR" position to synchronize the transmitter with the ORANGE collar/receiver.
2. Place the red dot on the back of the transmitter against the red dot on the Green or Orange
collar/receiver. Hold the two red dots together for several seconds, until the green LED on the
receiver/collar starts to blink rapidly, and then separate the two red dots.
3.
Hold the RUN/POINT button and the POINT button on the front of the transmitter
simultaneously down for 3 seconds or until the rapid green blink of the LED on the
receiver/collar resumes a slower pace. The code setting work is now completed.
Code setting guide for Dogtra RB1000 / RB1002
GR/OR Toggle Switch
Dogtra-Europe
Immeuble Le Vauban
Parc d'activités de La Verrière
4 rue de Panicalé
78320 La Verrière, France
TEL: +33 (0) 130 62 65 65
FAX: +33 (0) 130 62 66 11
E-mail: [email protected]
RUN/POINT Button and POINT
Button on the front of the transmitter