Dogtra RB 1000 Series Kod Ayarlama Kılavuzu - Sayfa 2

Evcil Hayvan Bakım Ürünü Dogtra RB 1000 Series için çevrimiçi göz atın veya pdf Kod Ayarlama Kılavuzu indirin. Dogtra RB 1000 Series 2 sayfaları.

1. Start with the receiver/collar turned off and the transmitter turned on.

On the front of the transmitter there is a GR/OR toggle switch. Set this toggle switch on the

"GR" position to synchronize the transmitter with the GREEN collar/receiver. Set the toggle

switch on the "OR" position to synchronize the transmitter with the ORANGE collar/receiver.

2. Place the red dot on the back of the transmitter against the red dot on the Green or Orange

collar/receiver. Hold the two red dots together for several seconds, until the green LED on the

receiver/collar starts to blink rapidly, and then separate the two red dots.

Hold the RUN/POINT button and the POINT button on the front of the transmitter

simultaneously down for 3 seconds or until the rapid green blink of the LED on the

receiver/collar resumes a slower pace. The code setting work is now completed.

Code setting guide for Dogtra RB1000 / RB1002

GR/OR Toggle Switch

Dogtra-Europe

Immeuble Le Vauban

Parc d'activités de La Verrière

4 rue de Panicalé

78320 La Verrière, France

TEL: +33 (0) 130 62 65 65

FAX: +33 (0) 130 62 66 11

RUN/POINT Button and POINT

Button on the front of the transmitter