Akrobat GALLUS Manuale d'installazione e d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sport e attività all'aperto Akrobat GALLUS. Akrobat GALLUS 14.

Continue by joining the frame legs with the frame parts – start with the frame part with T-socket (as shown

on the image).

Make sure the free part of the junction part is turned to the outside of the frame circle. Rotate the leg

extension until the AkroClick system clicks together to form a solid connection and the leg can't come out

anymore.

Continue assembling the frame, alternating the frame parts with and without sockets to form a circle.

Important:

The trampoline legs could some-

times be slightly tight to fit – it is in-

tended this way to serve as addition-

al strength for the trampoline.

The

frame

your

trampoline

assembled and you can place it on the desired

location.

INSTALLATION AND USER MANUAL - GALLUS

AKROBAT HINT:

For easier assembling of the frame parts apply some

grease for bearing to all junctions.

now

4. PREPARING OF FOUNDATION AND ANCHORING OF

TRAMPOLINE

Preparing foundation

Before placing trampoline to the final location concrete foundations must be prepared. If concrete surfacing

already exists you must ensure that impact attenuating surfacing is properly placed on the entire impact area

(look at page 23).

Concrete foundations should be prepared as shown on pictures bellow (according to the dimension of

your trampoline). We recommend to prepare foundations in front, before installation of trampoline, so that

concrete is completely dry once you start fixing your trampoline. The individual concrete foundation should

be of dimensions 40x40x40 cm.

10 FT

275 cm

14 FT

385 cm

AKROBAT HINT:

The dimension on each sketch shows the center distance between the concrete foundations.

12 FT

330 cm

40 cm

480 CM

40 cm