Akrobat GALLUS Manuale d'installazione e d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sport e attività all'aperto Akrobat GALLUS. Akrobat GALLUS 14.

Anchoring

Place the assembled trampoline frame to

the position so that concrete foundation are

beyond each trampoline leg. Fix the trampoline

leg with enclosed pipe clamps which you

fasten in the concrete with enclosed screws

(anchor bold). Repeat the same procedure

with all trampoline legs.

Concrete foundation:

40 x 40 x 40 cm

INSTALLATION AND USER MANUAL - GALLUS

Fitting the mat and installing the springs

Lay the mat flat inside the frame. Make sure

the logo is facing upwards. In order to make the

installation of the jumping mat easier, locate

the four rings lying directly across each other

like clock positions: 3, 6, 9 and 12, and attach four

springs on these locations first. Then continue by

attaching springs to every eighth ring, followed

by every fourth and so on until all springs are

attached.

During assembly it may look like the mat won't

fit. It will however stretch to the correct size

when you finish attaching all springs and this

may take a little force.

Attaching the frame pad

Lay the frame safety pad on top of the trampoline with the eyelets facing up. Insert the elastic toggles

through the eyelets so the loop end of the tie faces outwards and the toggle end is on the inside.

Flip the frame pad over and pull the elastic

band around the frame. Insert the toggle into

the loop, then rotate the toggle inwards to

secure it. Repeat with all frame pad elastics.

Important:

The frame pad must cover the

entire frame and all springs.

AKROBAT HINT:

Springs can be hard to attach, you will need a little

force. Help yourself by using one spring to pull

another towards the frame holes. If your kit includes

a spring tool, use it. Do not forget to wear gloves!

Important: Be sure all spring hooks

are well attached to the frame.