- ページ 6
スポーツ&アウトドア Akrobat GALLUSのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akrobat GALLUS 14 ページ。
Anchoring
Place the assembled trampoline frame to
5
the position so that concrete foundation are
beyond each trampoline leg. Fix the trampoline
leg with enclosed pipe clamps which you
fasten in the concrete with enclosed screws
(anchor bold). Repeat the same procedure
with all trampoline legs.
Concrete foundation:
40 x 40 x 40 cm
10
INSTALLATION AND USER MANUAL - GALLUS
Fitting the mat and installing the springs
Lay the mat flat inside the frame. Make sure
6
the logo is facing upwards. In order to make the
installation of the jumping mat easier, locate
the four rings lying directly across each other
like clock positions: 3, 6, 9 and 12, and attach four
springs on these locations first. Then continue by
attaching springs to every eighth ring, followed
by every fourth and so on until all springs are
attached.
During assembly it may look like the mat won't
fit. It will however stretch to the correct size
when you finish attaching all springs and this
may take a little force.
Attaching the frame pad
Lay the frame safety pad on top of the trampoline with the eyelets facing up. Insert the elastic toggles
7
through the eyelets so the loop end of the tie faces outwards and the toggle end is on the inside.
Flip the frame pad over and pull the elastic
band around the frame. Insert the toggle into
the loop, then rotate the toggle inwards to
secure it. Repeat with all frame pad elastics.
Important:
The frame pad must cover the
entire frame and all springs.
AKROBAT HINT:
Springs can be hard to attach, you will need a little
force. Help yourself by using one spring to pull
another towards the frame holes. If your kit includes
a spring tool, use it. Do not forget to wear gloves!
Important: Be sure all spring hooks
are well attached to the frame.
11