Akrobat GRASSHOPPER Manuale d'installazione e d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sport e attività all'aperto Akrobat GRASSHOPPER. Akrobat GRASSHOPPER 16.

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points and
sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.
TOOLS: You will need a cross-head screwdriver for the retaining wall PVC panels.

Assembling the frame

Lay all the frame parts on the ground with the
1
spring holes facing upwards as pictured below.
Push all frame parts together until all are fully
mated together.
Please note: On the long sides, the frame will appear to bow outwards - this is by design. When the springs are attached
the frame will pull inwards, but always have a slide outward bow.
Important: all trampoline sizes are approximate and can be up to +/- 3" (2.5 cm) different to those that we
publish.
Fitting the mat and installing the springs
Lay the mat flat inside the frame. Make sure the
2
logo is facing upwards. In order to make the
installation of the jumping mat easier, locate the
four rings in the cornersof the jumping mat and
attach four springs on these locations first. Then
continue by attaching springs from the corners
to the middle of the jumping mat until all springs
are attached.
At first, it may look like the mat won't fit, it will
however stretch to the correct size when you
finish attaching all springs.
After joining all the frame parts, install the trampoline legs
into the sockets on the frame.
Note: The frame will get its final shape after the jumping
mat is installed.
AKROBAT HINT:
Springs can be hard to attach, you will need a little force. Help
yourself by using one spring to pull another towards the frame
holes. Do not forget to wear gloves!
Important: Be sure all spring hooks
are well attached to the frame.
5