Akrobat PLAYGROUND Manuale d'installazione e d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sport e attività all'aperto Akrobat PLAYGROUND. Akrobat PLAYGROUND 8. 6'7'' x 6'7'' / 200 x 200 cm

Stampa la pagina

Akrobat PLAYGROUND Manuale d'installazione e d'uso

2. TRAMPOLINE PARTS

Part A

Metal frame

Part B

Rubber tiles-frame plates

Part C

Springs 14 cm

Part D

Jumping mat

Part E

Spring tool

INSTALLATION AND USER MANUAL - PLAYGROUND

PLAYGROUND

6'7'' x 6'7'' / 200 x 200 cm

4 pcs

60 pcs

1 pc

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from

pinch points and sharp points during assembly. Do not apply excessive force during assembly that will

cause damage to the product.

Assembling the frame

Assembling of metal frame is done

outside the ground hole. Frame is

composed of 4 equal metal plates, first

take 2 pieces and push them togehter in

prepared holes on the frame (it is click

system - they will assemble together).

Follow the same procedure with 3

metal plate, so that you get square

metal frame. No additional screws are

needed.

Fitting the jumping mat & installing the springs

Lay the jumping mat inside the frame

of the trampoline. In order to make the

installation of the jumping mat easier,

put the eight springs in the corners of

the jumping mat and attach all eight

springs on these locations first. You must

attach springs to the wire which is sewn

in jumping mat. Use spring tool to help

you attaching springs on the frame.

Continue by attaching springs from the

corners to the middle of the mat on all

four sides until all springs are attached.

As there is no extra mark of the position

of the springs on the jumping mat just

follow the linear line of springs according

to the holes on the frame. Be sure that

all 60 spring hooks are properly and well

attached.

Important:

Be sure all spring hooks are well attached

to the frame.

and