DogWatch GroundsKeeper Manuale di istruzioni per l'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Prodotto per la cura degli animali domestici DogWatch GroundsKeeper. DogWatch GroundsKeeper 8.
Stampa la pagina
Troubleshooting
RECEIVER
• Check to see if the transmitter is "on".
• Take the receiver off the dog and check the receiver by placing
the test light on the contact posts and holding the receiver next
to the transmitter or boundary wire.
• Ensure that the contact points on the receiver collar actually
touch your pet's skin; tighten the collar as required.
• Replace the battery if necessary.
• Be sure the battery is inserted correctly.
TRANSMITTER
• Check to see If the power is "on" and that there is a green light.
• Make sure that the power supply transformer is securely
plugged into the wall outlet and that both the power supply
plug and the boundary wire are connected to the transmitter.
• Adjust the Range "+/ - ". You may have too narrow a range,
allowing your pet too close to the boundary area before
receiving a warning.
• Never adjust the transmitter while your pet is wearing the
receiver collar.
BOUNDARY WIRE
• Check to see if the transmitter is "on.
• If you have a broken boundary wire the green loop light will go
out and an audible warning will sound.