DogWatch GroundsKeeper 사용 설명서 - 페이지 7

{카테고리_이름} DogWatch GroundsKeeper에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DogWatch GroundsKeeper 8 페이지.

Troubleshooting

RECEIVER

• Check to see if the transmitter is "on".

• Take the receiver off the dog and check the receiver by placing

the test light on the contact posts and holding the receiver next

to the transmitter or boundary wire.

• Ensure that the contact points on the receiver collar actually

touch your pet's skin; tighten the collar as required.

• Replace the battery if necessary.

• Be sure the battery is inserted correctly.

TRANSMITTER

• Check to see If the power is "on" and that there is a green light.

• Make sure that the power supply transformer is securely

plugged into the wall outlet and that both the power supply

plug and the boundary wire are connected to the transmitter.

• Adjust the Range "+/ - ". You may have too narrow a range,

allowing your pet too close to the boundary area before

receiving a warning.

• Never adjust the transmitter while your pet is wearing the

receiver collar.

• Check to see if the transmitter is "on.

• If you have a broken boundary wire the green loop light will go

out and an audible warning will sound.