Akrobat GALLUS INGROUND Manuale d'installazione e d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Accessories Akrobat GALLUS INGROUND. Akrobat GALLUS INGROUND 20. 10ft; 12ft; 13.5ft; 14ft

Stampa la pagina

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points and

sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.

The hole should not accumulate water (in which case the drainage is necessary) and it should be possible to clean during

maintenance.

TOOLS: You will need a cross-head screwdriver for the retaining wall PVC panels.

Assembling the frame

Lay the frame sections (Part A) into a circle

with the spring holes facing upwards. Push

all sections together until all are fully mated

together.

Fitting the mat and installing the springs

Lay the mat flat inside the frame. Make sure the

logo is facing upwards. In order to make the

installation of the jumping mat easier, find the

four rings in the 12, 3, 6 and 9 o'clock position

directly oposite each other and attach four

springs on these locations first. Then continue by

attaching springs to every eighth ring, followed

by every fourth and so on until all springs are

attached.

At first, it may look like the mat won't fit, it will

however stretch to the correct size when you

finish attaching all springs.

AKROBAT HINT:

Springs can be hard to attach, you will need a little force. Help

yourself by using one spring to pull another towards the frame

holes. Do not forget to wear gloves!

Important:Be sure all spring hooks

are well attached to the frame.