Akrobat GALLUS INGROUND Manuale d'installazione e d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Accessories Akrobat GALLUS INGROUND. Akrobat GALLUS INGROUND 20. 10ft; 12ft; 13.5ft; 14ft

Stampa la pagina

Attaching the pvc retaining panels

The next step is screwing the PVC retaining

wall panels to the frame. You will need the

cross-head screwdriver and gloves. Take one

panel and place it against the outside of the

frame. You will find four holes in the frame and

four holes in the wall panel. Insert and tighten

the four screws to attach the panel tightly to

the frame. Repeat with all remaining panels.

Digging the trampoline pit

Position the frame on the location you chose and mark the position on the ground. It's best to mark

out a hole a bit wider than the diameter of your trampoline.

This will make it easier for you to put the frame in and find the right level. Dig the pit to the

following dimensions:

TRAMPOLINE SIZE

Dimension A – Outer hole

10 ft / cca. 305 cm

12ft / cca. 366 cm

13.5ft / cca. 411 cm

14ft / cca. 427 cm

First, dig the outer hole to create a ledge for

your trampoline frame, which needs to be

25cm deep. This is the exact frame height, so

that the safety pad on top of the frame will be

just above the grass level. Continue by digging

the inner hole.

AKROBAT HINT:

It's a relatively easy task to hand dig the hole for smaller size trampolines, but it would be best to hire a

mini digger able to excavate most of the soil and leave you with the finishing touches.

Note: You will need to save some of the soil for later.

INSTALLATION AND USER MANUAL - GALLUS INGROUND

Dimension B – Inner hole

204 cm

264 cm

371 cm

387 cm

Dig out in a bowl shape to a depth of 75

cm (10ft & 12ft trampolines), or 90 cm

(13.5ft & 14ft trampolines). The inner hole

should be 40 cm narrower in diameter than

the trampoline, which leaves a 20 cm ledge all

around to place the trampoline.

Dimension C – Total depth

75 cm

90 cm