Cloos Arc Flash 4 evo Istruzioni per l'uso ed elenco delle parti di ricambio - Pagina 10
Sfoglia online o scarica il pdf Istruzioni per l'uso ed elenco delle parti di ricambio per Accessori per moto Cloos Arc Flash 4 evo. Cloos Arc Flash 4 evo 20. Welding helmet
Anche per Cloos Arc Flash 4 evo: Manuale di istruzioni per l'uso (16 pagine)
Stampa la pagina
4. Unpacking / Assembly
4.1 Unpacking
Check that the package is complete and that no part is damaged due to
the transport or for other reasons.
A package with the complete system including accessories contains:
1. Blower unit incl. Battery and P R SL Filter and Pre Filter
2. Belt
3. Air hose
4. Air flow indicator
5. Battery charger
6. User Instructions
4.2 Assembly
Attach the respiratory unit onto the belt: Pass the inner strap through
the back of the blower loops. The pass through the 2 belt loops and then
through the buckle. Fit the battery to the Blower unit.
4.2.1 Waist-Belt Adjustment
Put the belt around your waist with the blower unit to the back and fasten
the two ends together. If the belt is too loose, slide the male adjuster down
the belt, towards the female half. If the belt is too tight, slide the male ad-
juster away from the female half.
Repeat the above processes until a comfortable and secure fit is achieved.
Once the belt fits correctly, secure any excess belt material using the velcro
sections.
4.2.2 Particulate Filter
Use only filters and Pre-Filters as supplied by CLOOS. It should first be
ascertained by consulting an occupational hygienist or by calling the ma-
nufacturers technical help line as to whether or not the CLOOS Filter will
offer suitable protection from the hazard.
The respiratory power unit is equipped with a high efficiency particle
filter class PRSL and a Pre-Filter. As soon as the warning alarm sounds, the
Pre-FiIter should be exchanged or checked. In very dusty areas this can be
necessary on a frequent basis.
The filters must be regularly checked (see „Air Flow Test") and replaced.
Make sure that the new filters are within their expiry date, unused and
not evidently damaged . From the hygienic point of view the maximum
working time of a main filter is 180 hours and should not be exceeded. It is
prohibited to clean the filters by any procedure!
10