Cloos Arc Flash 4 evo 사용 설명서 및 예비 부품 목록 - 페이지 10

{카테고리_이름} Cloos Arc Flash 4 evo에 대한 사용 설명서 및 예비 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Cloos Arc Flash 4 evo 20 페이지. Welding helmet
Cloos Arc Flash 4 evo에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

4. Unpacking / Assembly

4.1 Unpacking

Check that the package is complete and that no part is damaged due to

the transport or for other reasons.

A package with the complete system including accessories contains:

1. Blower unit incl. Battery and P R SL Filter and Pre Filter

2. Belt

3. Air hose

4. Air flow indicator

5. Battery charger

6. User Instructions

4.2 Assembly

Attach the respiratory unit onto the belt: Pass the inner strap through

the back of the blower loops. The pass through the 2 belt loops and then

through the buckle. Fit the battery to the Blower unit.

4.2.1 Waist-Belt Adjustment

Put the belt around your waist with the blower unit to the back and fasten

the two ends together. If the belt is too loose, slide the male adjuster down

the belt, towards the female half. If the belt is too tight, slide the male ad-

juster away from the female half.

Repeat the above processes until a comfortable and secure fit is achieved.

Once the belt fits correctly, secure any excess belt material using the velcro

sections.

4.2.2 Particulate Filter

Use only filters and Pre-Filters as supplied by CLOOS. It should first be

ascertained by consulting an occupational hygienist or by calling the ma-

nufacturers technical help line as to whether or not the CLOOS Filter will

offer suitable protection from the hazard.

The respiratory power unit is equipped with a high efficiency particle

filter class PRSL and a Pre-Filter. As soon as the warning alarm sounds, the

Pre-FiIter should be exchanged or checked. In very dusty areas this can be

necessary on a frequent basis.

The filters must be regularly checked (see „Air Flow Test") and replaced.

Make sure that the new filters are within their expiry date, unused and

not evidently damaged . From the hygienic point of view the maximum

working time of a main filter is 180 hours and should not be exceeded. It is

prohibited to clean the filters by any procedure!