Ashford Jack Manuale di istruzioni per il montaggio - Pagina 16
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Tessitura Ashford Jack. Ashford Jack 16.
There are 5 warp sticks included with your Jack Loom.
FRONT ROLLER
To attach a warp stick to the front roller, thread 1 texsolv cord
through the first hole in the warp stick and back through the
second to end loop in the cord.
Then take the long end of the cord through the small hole in
the warp roller and out the large hole. Then push a texsolv peg
through the cord. The peg pulls down flat into the large hole.
BACK ROLLER
Thread 1 texsolv cord through the first hole in the warp stick
but leave 8 holes leaving approx. 10cm of Texsolv cord.
Then take the long end of the cord through the small hole in
the warp roller and out the large hole. Then push a texsolv peg
through the cord. The peg pulls down flat into the large hole.
Use the third warp stick for your end warp stick (refer to warp
instructions) and attach to the end of the Texsolv cord with a
Texsolv peg.
16