Ashford Jack Інструкція з монтажу Посібник з монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Ткацтво Ashford Jack. Ashford Jack 16 сторінок.

There are 5 warp sticks included with your Jack Loom.

FRONT ROLLER

To attach a warp stick to the front roller, thread 1 texsolv cord

through the first hole in the warp stick and back through the

second to end loop in the cord.

Then take the long end of the cord through the small hole in

the warp roller and out the large hole. Then push a texsolv peg

through the cord. The peg pulls down flat into the large hole.

BACK ROLLER

Thread 1 texsolv cord through the first hole in the warp stick

but leave 8 holes leaving approx. 10cm of Texsolv cord.

Then take the long end of the cord through the small hole in

the warp roller and out the large hole. Then push a texsolv peg

through the cord. The peg pulls down flat into the large hole.

Use the third warp stick for your end warp stick (refer to warp

instructions) and attach to the end of the Texsolv cord with a

Texsolv peg.