Cloud 36 Manuale di installazione e funzionamento - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Amplificatore Cloud 36. Cloud 36 14. 36/50 2 zone integrated mixer amplifier

Stampa la pagina

36/50: Installation and Operation Manual

(primary & secondary series connected) and we recommend the fitting of the screening can

(part number 210-6469); Canford Audio supply a similar transformer OEP Z1604 but we

suggest that these should be fitted in a screened housing. All transformers should be wired

to give a ratio of 1:1.

Default Jumper Settings

This section is intended as a quick reference for the experienced user, for more detailed

information please consult the rest of the manual.

Jumper

J10

J11

J12

J13

* Note that if the 36/50 is factory fitted with a 100V/70V line module CXL-3120, the default setting

for jumpers J5, J8 and J9 is ON

EMC Considerations

The Cloud 36/50 fully conforms to the relevant electromagnetic compatibility (EMC)

standards and is technically well behaved; you should experience no operational problems

and under normal circumstances no special precautions need to be taken. If the unit is to be

used within close proximity to potential sources of HF disturbance such as high power

communications transmitters, radar stations and the like, it is suggested that the microphone

cable screen be connected to the shell of the XLR type connector and the line input leads be

kept as short as possible.

06/12/02 V5.0

Various Methods for Wiring a 1:1 Ratio Transformer

Phantom Power

Bypass Zone 1 mic access terminal

Bypass Zone 2 mic access terminal

Bypass Utility mic access terminal

Zone 1 65Hz high pass filter

Zone 1 source select (FR or SW)

Zone 2 source select (FR or SW)

Zone 2 65Hz high pass filter

Utility 65Hz high pass filter

Utility source select (Zone 1, Line 1 or Zone 1 slave)

Line 6 priority release time (3s, 6s or 12s)

Zone 1 Line 6 priority

Zone 2 Line 6 priority

Function

Default Setting

OFF

OFF*

Zone 1

OFF