Cypress Semiconductor CYALKIT-E03 Manuale del kit - Pagina 7
Sfoglia online o scarica il pdf Manuale del kit per Accessories Cypress Semiconductor CYALKIT-E03. Cypress Semiconductor CYALKIT-E03 19. Solar-powered bluetooth low energy sensor beacon 5 pack
Anche per Cypress Semiconductor CYALKIT-E03: Manuale di avvio rapido (2 pagine)
Stampa la pagina1.2 Block Diagrams
▪
PC based on Windows 7/8.1/10
iOS 8 or newer
▪
Android 4.4 or newer
▪
1.3 Features
The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack provides everything needed to develop a light-powered sensor
node that transmits sensor data using Bluetooth Low Energy (BLE):
Tiny solar-powered BLE sensor board (circle with 24-mm diameter, same size as 25-cent coin)
Operates using light energy harvested (>100 lux) by the included solar cell
Supports BLE communication with a mobile device (iOS 8 or newer/Android 4.4 or newer)
Energy harvesting PMIC S6AE103A that supports the following applications:
□
Demo mode, transmitting sensor data at 3- to 60-second intervals (without charging to a supercapacitor)
□
Timer mode, transmitting sensor data at 5-minute intervals while charging to the supercapacitor
□
Transmitting data at over 30 hours without ambient light (when mode is set to Timer mode and supercapacitor is
fully charged)
Solar BLE Sensor that can support the following:
□
Selection of mode using a slide switch (Demo or Timer mode)
□
Programming and debugging of the EZ-BLE module via Debug Board
□
Parameter setting of BLE Beacon via Debug Board
□
Charging of surplus solar energy to a 0.2-F supercapacitor (Timer mode)
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Figure 1-2. Block Diagram of Solar BLE Sensor
Introduction
7