Cypress Semiconductor CYALKIT-E03 Kit Manual - Page 7

Browse online or download pdf Kit Manual for Accessories Cypress Semiconductor CYALKIT-E03. Cypress Semiconductor CYALKIT-E03 19 pages. Solar-powered bluetooth low energy sensor beacon 5 pack
Also for Cypress Semiconductor CYALKIT-E03: Quick Start Manual (2 pages)

1.2 Block Diagrams

PC based on Windows 7/8.1/10
iOS 8 or newer
Android 4.4 or newer

1.3 Features

The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack provides everything needed to develop a light-powered sensor
node that transmits sensor data using Bluetooth Low Energy (BLE):
Tiny solar-powered BLE sensor board (circle with 24-mm diameter, same size as 25-cent coin)
Operates using light energy harvested (>100 lux) by the included solar cell
Supports BLE communication with a mobile device (iOS 8 or newer/Android 4.4 or newer)
Energy harvesting PMIC S6AE103A that supports the following applications:
Demo mode, transmitting sensor data at 3- to 60-second intervals (without charging to a supercapacitor)
Timer mode, transmitting sensor data at 5-minute intervals while charging to the supercapacitor
Transmitting data at over 30 hours without ambient light (when mode is set to Timer mode and supercapacitor is
fully charged)
Solar BLE Sensor that can support the following:
Selection of mode using a slide switch (Demo or Timer mode)
Programming and debugging of the EZ-BLE module via Debug Board
Parameter setting of BLE Beacon via Debug Board
Charging of surplus solar energy to a 0.2-F supercapacitor (Timer mode)
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Figure 1-2. Block Diagram of Solar BLE Sensor
Introduction
7