1010music Synthbox Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Sintetizzatore 1010music Synthbox. 1010music Synthbox 2.
Anche per 1010music Synthbox: Manuale di avvio rapido (2 pagine)
Stampa la pagina
Configure the Wavetables and Oscillator
1.
Push the HOME button until you are back to the Main screen.
2.
On the Touch Screen, touch the element you want to control to display the Parameters
screen for that element. Touch the top waveform for Wavetable 1, the bottom waveform for
Wavetable 2, or the
3.
Adjust a parameter by turning the Control Knob next to it.
4.
The parameters that can be modulated have three black boxes under the parameter
setting, allowing you to configure three different sources to modulate that parameter. For
example, in the screenshot on the right,
and
LFO1
EXT1
Apply Effects
1.
Push the HOME button until you are back to the Main screen.
2.
Touch the name of the effect you want to control to display the Parameters screen for that
element:
for a filter,
FILT
3.
Adjust a parameter by turning the Control Knob next to it. Note that some effects
parameters also have three black boxes under them that allow you to configure modulation
of the parameter.
Apply ENV and LFO Modulation
Synthbox allows you to modulate the waveforms, oscillator and effects via envelopes, low frequency oscillators, sequencers, and
control voltage inputs. The method of applying modulation to each of these elements is the same, so we will use a wavetable as
an example.
1.
From the Main screen, touch the element you want to modulate (e.g. Wavetable 1) to
display the Parameters screen for that element.
2.
Touch a black box under a parameter (e.g. the
the Modulation Selection screen.
3.
Use the Control Knobs to adjust the modulation
choose
and
LFO1
4.
Push the HOME button twice to go back to the Main screen.
5.
From the Main screen, touch
Control Knobs to adjust the
page 2 of the
LFO1
Note:
You can use these same steps to apply
•
modulation is always applied to the voltage control amplifier for the voice. You can edit the
ENV1
•
parameters the same way as you edit the
To Use CV Modulation:
1.
Plug a CV Modulator into the rightmost column of the bottom row of CV Input Jacks.
2.
From the Main screen, touch the top waveform to display the Wavetable Parameters screen.
3.
Touch a black box under the
jack will now control the modulation of the
EXT3
Learn More
Learn about more features of synthbox such as Sequencer Modulation by downloading the Synthbox User Manual or watching
Synthbox Videos on our website at http://1010music.com/support-2.
Join the conversation with other synthbox owners at https://forum.1010music.com.
10/24/17 1:26 PM
OSC
button just below the waveforms on the left for the Oscillator.
LFO2
are modulating
. We'll discuss modulators later.
WPos
for flanger and distortion and
FLDS
for audible results.
50%
to display the Parameters screen for
LFO1
parameters as desired. Push the INFO button to see
LFO1
parameters screen. Push the INFO button again to go back to page 1.
parameter to add a modulator. Choose
Pitch
Digital Heart – Analog Soul
is configured as a modulator for
for delay.
DLY
WPos
parameter for a wavetable) to display
and
. To start with,
Source
Amount
LFO1
and
modulation.
ENV2
LFO2
LFO
and
ENV2
parameters.
parameter.
Pitch
Wavetable Parameters
Pitch
, and
FILT Parameters Screen
. Use the
Modulation Selection
for the
. The CV Input in the
EXT3
Source
Copyright 1010music LLC 2017
Screen
Screen
ENV1